In order to maintain the accuracy of the cross cutting machine, extend its service life, and ensure the safety of personnel and equipment, the following safety operating procedures must be strictly followed during operation:1. Wear work clothes neatly, and female workers should wear work hats.Before driving, it is necessary to check whether the machine handle and operating parts are normal.3. The materials should be aligned, clamped, and checked to ensure that the leveling and straightening equipment is turned on synchronously.After installing the materials, it is necessary to measure the center positioning and check whether the hole spacing is correct.5. It is necessary to stop and change gears. When the machine tool is running, it is strictly prohibited to touch the material with hands, and it is not allowed to touch the mold and motor with hands.6. It is strictly prohibited to place work, measuring tools, gloves, and other items on the machine tool guide rails and molds.7. After starting up, do not leave the machine tool and concentrate on the operation.8. After work, clean the machine tools, tidy up the area, and cut off the power supply of the machine tools. Lubricate the machine tool gears with oil.During the machining process, if abnormal sound or malfunction of the machine tool is found, the power should be immediately cut off, the fault diagnosed or the manufacturer notified.